Grinch Can Holder / Beer mug (two types)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two Can Holders for 0.5L Cans (12oz+330ml can inserts)
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 298
- Wydruki
- 0
- Wyświetlenia
- 693
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Grinch Can Holder (two types)
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°)
Choose from two versions:
#1 XL (warning, eat up a lot of material :-))
#2 Compact
As always - here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)