1 / 22
Modular Cupholder for Mercedes W447 (W205 W213 and W238) based on Gridfinity — zdjęcie 1
1 / 22

Modular Cupholder for Mercedes W447 (W205 W213 and W238) based on Gridfinity

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular Cupholder for Mercedes V Class / Vito W447 (also compatible to W205, W213, W238) based on Gridfinity

Ocena
0 / 5
Polubienia
14
Pobrania
61
Wydruki
0
Wyświetlenia
707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement for part number A2056800691 and therefore, compatible to Mercedes W447 (V Class), W205 (C Class), W213 (E Class) and W238 (E Class).

Detailed instructions will follow later.

Here are some remarks as first aid :D

  • As you can see on the last picture (photo from W447 interior), there's a cupholder for the front part and one for the area behind. Please take care to print the right one (or both ;) ) Remove everything whats inside the cupholder area e.g. the rubber inlays.
  • I design my models in a way, that there's no support required. Nevertheless, for the cupholder clips, the cover of the front cupholder and the cupholder itself there's support required (purple object in the images). 
  • Try to print the cover and cupholder part (not the base) in original orientation with support. This way the top surface will be smooth. I tried it upside down and the surface was not printed well (even with layer tuning). 
  • you need 6mm x 2mm Neodym magnets for Gridfinity plate and the boxes. They will be pressed into the available holes. Do not use glue - it's not required at all. The magnet should stick perfectly.
  • for the cup holder clips there's the original double torsion spring from the Mercedes cupholder required. You have to disassemble it first. :(
  • There's one small box, where I designed a lid (black object in the images) with space for a bubble level (really handy for my Marco Polo). It can be pressed in.

Shopping list:

 

Tagi