RackSlide Large Frame (no ears)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds RackSlide "Large" drawers. Can be made to fit in a 10" (or wider) racks.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Want a drawer system for your rack? RackSlide has you covered!
No supports needed, just print in the orientation in the model (with the text standing up and readable).
This does not have ears but has already been sized to accept a 3mm rack cover, just cut a sized hole in the rack cover you want to adapt to.
This is meant to be printed in a custom rack configuration and not to be printed as-is.
In the example picture, this model was made with a 3mm rack cover in a 10" rack.
Look through all of the “Large” RackSlide models here: https://www.printables.com/@ChrisKewl/collections/2854239
See all of my RackSlide models at: https://www.printables.com/@ChrisKewl/collections/2849415
Did you enjoy this model? Help support me with a tip: https://ko-fi.com/chriskewl