BeaglePlay Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a BeaglePlay case using up to four external antennas.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This case holds a BeaglePlay single-board computer. To assemble it the way I did requires:
- 3 socket-head cap screws, M3 x 15 mm
- 1 socket-head cap screw, M3 x 5mm
- 4 heat-set inserts for M3, these are 6 mm long
There are also a set of alignment pins, if you want to verify fit before sinking any heat-set inserts.
To mount the external antennas, use the same recommendations from this model's progenitor, repeaed here to stand alone.
u.FL to SMA Extenders -
https://www.amazon.com/gp/product/B01HXU1PKS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
2.4GHz Antennas Used - https://www.amazon.com/gp/product/B088GWHNCR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Sub-Gig Antennas -
https://www.amazon.com/gp/product/B095JTW6XM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
or
https://www.amazon.com/gp/product/B086ZG5WBR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Note on changes 2025-Nov-29:
- Increased cutout size for USB connector, extending cutout into bottom part.
- Moved cutouts slightly to better align
- Raised the interior pedestals slightly to give better clearance to surface mount connectors.