Gojo (HueForge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gojo from Jujutsu Kaisen
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here's a HueForge print Satoru Gojo from Jujutsu Kaisen. It's got that dramatic half face look with his hair all spiked out and one eye staring right at you. I layered the colors starting from black at the bottom, then blue gray, sky blue, and white on top to get the shading just right.
The whole thing is 200mmx100mm, so it fits nicely on most printer beds. Printed without any issues on mine, and the color shifts came out smooth. If you're into JJK or just like experimenting with HueForge, this could be fun to try.
Printing Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Start with Black
- At layer 16 swap to Blue Gray
- At layer 21 swap to Ivory White
- At layer 28 swap to Sky Blue
If you like this dont forget to check out my other models!