1 / 3
Avatar Goggles X extension module mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A removable mount for the Goggles X Extension, doesn't require gluing or anything permanent.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a removable mount for the Walksnail avatar goggles x extension module, as I sometimes fly with analog drones.
I recommend printing it upright (see picture) with supports on the side antenna holes and inside.
Material doesn't matter, I used PLA.