Wish board from Silksong NO AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SHAAW!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
If you have a wish you want to see fulfilled print this, a miniature of hornet and hope she will take care of it.
This model prints with minimal supports, and you don't need any multi material system to print the multicolor parts, you just need to insert a pause at the layer where the details begin and swap filament manually. Remember that orca slicer and bambu studio apply the pause at the beginning of the selected layer.
You will need some super glue.
As long as you scale the model up you should encounter no problem, if you scale it down good luck.
This is part of the model of the whole city of Bellhart, which you can purchase on printables or cults3d.