MSI Katana Laptop Screen Hinge Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There is a common problem with MSI Katana models (mine was a GF66) where the screen breaks just up from the hinge.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Presenting this just in case it's useful for someone
This is a hinge reinforcement for an MSI Katana laptop. One day when I closed my laptop screen it just broke along the side of the screen, just above the hinge. My first thought was ‘update time’… but then I wondered whether I could save it with my other hobby, 3D printing.
This is the result. It hooks around the bottom and side of the screen and has a large pad on the top of the screen to reinforce it.
I used superglue on the pad and the bottom of the clips. I also purposely printed it at 45 degrees to the plate (manual support and brim) - there is purposely a flat to give it more bed adhesion at 45 degrees. This is for strength.
OK, not the prettiest, but it worked for me and I'm still using the laptop!