Tower stand for EDC knives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tower-style stand to keep Your EDC knives collection organized.
- Ocena
- 4,5 / 5
- Polubienia
- 484
- Pobrania
- 752
- Wydruki
- 4
- Wyświetlenia
- 5018
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Little update: new version of spacers with proper dimensions - previous version was too long, my bad.
Has your EDC knife collection grown? Are you running out of space on your shelf?
That's why I've designed a simple tower-style stand for EDC knives.
The base measures 100x600mm, and the total height ranges from 83mm (2 knives with base) to 262mm (8 knives with base). The arm spacing is 60mm.
The photos show the printed version for 5 knives - elements above 6 knives have additional holes for cross reinforcement for greater stability.
The knife slots are inclined at an angle of 15 degrees and are 23mm high.
I have prepared two versions of the arms - for heat inserts (popular Ruthex inserts) and for regular M3 screws (10-12mm, socket cap head).
The base has three different designs, also shown in the photos.
In the near future, I will prepare:
a wider base with a wider arm spacing - 80mm
additional base designs
a new version of arms screwed together
The whole thing was printed with PLA, on a 0.4 nozzle - any other filament will also work.
Do you have an idea on how to improve the model?
Do you have your own base design? Feel free to write to me.