Laminar flow hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cheap alternative to a real flowhood. Creates a somewhat steril envoirment using laminar air flow using a cheap air filter from IKEA. Works great to avoid contamination when cloning mushrooms.
Simple print with PLA. I used supports but not sure its necessary. Glue the two parts togheter. Fans are a tight fit and no adhesive or screws are necessary but can be added.
Designed for IKEA “uppåtvind” airfilter and two 120mm p12 MAX fans from Artic.
Recomended to use a 5 to 12V converter with speed control since default 5 v is not enough to create a sufficent pressure gradient. And ofc a fan splitter.
Use a lighter to find the correct settings for laminar flow (a stable flame).
Filter: https://www.ikea.com/se/sv/p/uppatvind-filter-foer-partikelborttagning-90551498/
Fans: https://www.arctic.de/en/P12-Max/ACFAN00280A
Power: https://www.aliexpress.com/item/1005006220888976.html