Angler Fish LED Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design requires non 3D printed parts for complete assembly.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This angler fish model is designed to hold 2 AAA batteries which can be hidden inside the fish, wired up through a typical bendy straw, and to a LED light.
IN WORKING… Still looking to include a switch ON/OFF as right now it is always live when connected.
The Angler Fish Lamp will require some non 3D printed parts for complete assembly.
You will need:
Wire (for wiring the LED and making terminals
Wire pliers
Bendy/Curly Straw
LED (the one used in testing was a cool white 3.0-3.2 V LED pulled from a basic electronics kit)
2 AAA Batteries
Glue not required but may offer a permanent fix for the teeth.
and a bit of Aluminum foil was used in my battery pack
Once all parts have been printed out…
Instructions Coming Soon…
Printed in PETG