Loupe for lens from canon zoom lens 12x is
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recycle the lens from an old powershot camera into a loupe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a loupe frame to hold a lens from an old Canon Powershot camera.
It is just the front lens form the lens zoom body.
The lens, rubber light gasket and the frame plate (which twists to the left to remove)
Printed in PETG clear for the base with black at the top to reduce glare.
I only printed this once. I had to do some trim work, but I put that back into the model. Some trim work may still be required as these are salvaged parts.
There are threads and as always some lower layer height will help with thread resolution.
The cover is TPU and just to keep the lens from accumulating dust when not in use.
This is makes a nice loupe. You can clearly see without having to hug your eye to the opening.