1 / 2
Prusa Core One / MMU preset with 0.25 mm nozzle for ASA — zdjęcie 1
1 / 2

Prusa Core One / MMU preset with 0.25 mm nozzle for ASA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

sample project for MMU with the smallest Prusa nozzle (there is no system preset).

Ocena
0 / 5
Polubienia
7
Pobrania
24
Wydruki
0
Wyświetlenia
227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Public Domain

sample setup for MMU with 0.25 mm nozzle (there is no stock preset).

Printing the large brick with ASA or ABS needs attention to bed adhesion and chamber temperature (as hot as possible, disable print fan) as it warps easily, lifting off at the edges. A brim is recommended. XY shrinkage needs to be calibrated carefully 

PLA is straightforward but unsuitable for actual use as it creeps under stress. Parts will fall apart after a few weeks.

Supports are recommended, both for shape of the holes and to improve layer adhesion.

Update 2025/11/30:

I added another file that I will use as my own preset, 20251130a_MMU_N02p25. Studs print in a different color than everything else. Note, it uses filament paths 3 and 4. The print worked very well and loses minimal time (and material) in the wipe tower using “sparse layers” experimental feature. Can and should be printed without supports.