Drill Dust Collector Dyson DC25
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rework of @Sembazuru dust collector modified for Dyson DC25 (and other Dyson?) vacuum cleaner
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to make an connector for @Sembazuru's original model it to connect to our Dyson. My connector broke the other day so I have copied the original but reworked the nozzle to fit our DC25.
It may connect to other Dysons of a similar era, but I've not tested it.
The nozzle diameter (external) is 34mm
This remix is also thinner walled than the original.
Its designed to be printed without supports standing on the small end. I used a brim to ensure it was firmly attached to the build plate. (If you are worried use an internal and external brim).
I've also uploaded a variant that has a straight tube without the DC25 connection features.
This could be printed with the wide end on the build plate, using supports (And be more stable when printing if that is an issue with your printer.)