Wall Mounted Build Plate Magazine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted magazine to hold up to 5 standard Prusa Build Plates (or similar)
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Short & Simple:
I wanted a wall mounted magazine for my Mk4 and CoreOne build plates. And as always, I love designing stuff that makes full use of the available build volume.
The magazine consists of two parts, one a mirror of the other. Install it by first mounting the bottom half to the wall, then insert two build plates to the outer most slots. Place the second half on top, give it a little extra space for wiggle room and voila, you got your self one sweet a** build plate magazine on the wall.
This should also work with other formats. Printed in base size, the two brackets will just be placed further apart when you insert bigger build plates and they will stick out a little more.
If you have bigger build plates though, it also means you got yourself a bigger printer, so you might as well just scale it :).
Very sturdy due to smart angles and what not, also no layer separation around mounting holes.
2 perimeters at 0.4 mm nozzle are totally sufficient.
Have fun :)