Ruckus ICX7150-C12P Power Supply (PSU) fix - for Mean Well LOP-300-54
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for a different PSU.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Ruckus C12P, which is an excellent switch, has a known problem with power supplies breaking down (usually due to heat and inferior components).
Since I didn't want to replace the bad power supply with another bad one, I took the opportunity to design a frame for the Mean Well LOP-300-54. It is a 300W power supply (passive up to 180W) and therefore perfect as a replacement for the original 150W power supply.
To prevent overheating in the future, there is also space for a 4010 fan. This can also be connected directly to the Mean Well power supply, as it has a 2-pin fan connection for 12V.
To install the new power supply, all visible screws must be removed, then the white housing must be removed, and then the various plastic covers inside must be removed. Now the power supply can be detached. It is connected to the switch housing on the underside with a large thermal pad, so removing it may require some force.
Now the 3D-printed frame can be adjusted. To do this, 3 M3 heat inserts must be installed (https://www.ruthex.de/products/ruthex-gewindeeinsatz-m3-100-stuck-rx-m3x5-7-messing-gewindebuchsen).
Caution: Before installing the new power supply, it is essential to reverse the polarity of the connector to the motherboard.
Where there used to be white cables, there must now be black cables, and vice versa. Please refer to the photos.
Once this is done, the frame can be secured to the switch housing with three screws, and the power supply can be secured to it with one of the existing screws and three new M3 screws.
Finally, reassemble the covers and the housing and check the photos again!