Le Parfait Jar Stacking Ring (Ø82 mm & Ø100 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stacking ring for Le Parfait jars that prevents wobble and allows safe vertical stacking.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 2
- Wyświetlenia
- 47
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Le Parfait jars are great for storage, but their lids are not designed to be stacked. When placing one jar on top of another, they tend to wobble and shift.
This stacking ring sits on top of the lid and provides a stable surface for the jar above. It allows multiple jars to be stacked vertically without slipping.
This model is provided in two versions:
Ø82 mm for jars using the blue capsule (200 g)
Ø100 mm for jars using the green capsule (350 g, 500 g, 750 g, and 1000 g)
I designed these rings to stack jars vertically on my workbench to save space. The ring does not replace the lid or affect sealing. It simply rests on top of a closed jar.
Print settings
The model is easy to print and kept as minimal as possible. The contact area with the build plate is relatively small, so an outside brim is recommended.
On my Creality Ender-3 V3 SE, printing takes around 2 hours and uses approximately 30 g of filament.
Material | Any material should work |
Layer height | 0.32mm (Z-axis detail is not important) |
Perimeters | 3 |
Shell | Top: 3 |
Infill | 20% Gyroid |
Brim | Yes ~7 mm (low build plate contact model) |
Supports | No |
Speed | Medium to fast |
Options | I had great success enabling “Avoid crossing perimeters” |