Tweaked Nerf Rival Apollo Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tweaked version of the rail with a 1.5% scale up for a tighter fit and with small registration pegs on the bottom to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Tweaked version of the rail with a 1.5% scale up for a tighter fit and with small registration pegs on the bottom to help align and glue the rail to the side of the Apollo on the flat spot with the holes. Not a snap fit but the dimensions are good.
Scaling the part again for an even tighter rail fit would result in the pegs no longer aligning (obviously)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Hatchbox PLA Black
Notes:
Printed with brim at first, but was not needed with good leveling and reliable z-homing. Was also able to bridge without supports with no issue.
Category: Hobby