Apollo Pump Barrel With Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tweaked version of the Apollo Pump Kit barrel to include the needed hole for the M3 bolt that attaches it to the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Tweaked version of the Apollo Pump Kit barrel to include the needed hole for the M3 bolt that attaches it to the picatinny mount. The missing hole seemed like an oversight in the original part. Also added speed holes to make it go faster ;)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%-35%
Filament: Hatchbox PLA Orange
Notes:
Printed with a brim to enclose the base of supports. Based on notes from another maker that they had cracks toward the base of their barrel (the slits near where it attaches to the main body), I used support blockers in Cura to set infill on the bottom quarter to 35% and the top three quarters to 15%. This was to save plastic and to make the potential problem area stronger. Also blocked supports for holes on top as they are not needed.
Category: Hobby