Sovol SV08 Max Z Belt Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a guard to prevent prints scraps from falling into the gantry Z belt pulleys on the SV08 Max.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 181
- Wydruki
- 2
- Wyświetlenia
- 513
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a guard to prevent print scrap and other nasty things from falling into the gantry Z belt pulleys which is a pain to clean up. The stl has 4 pieces but there are only 2 different models which are a mirror of each other. There are bumps on the bottom that align with the Z post mounting screw holes and cover them as well. To install just remove the small machine screw near the belts and install the guard and reuse the screw.
Print as shown on the stl. Suggest PETG or ABS. I did not need supports for the bumps but you may elect to use them. I also used mouse ears.