1 / 4
Fixation pour plinthes lave-vaisselle / Dishwasher plinth fixing — zdjęcie 1
1 / 4

Fixation pour plinthes lave-vaisselle / Dishwasher plinth fixing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,68 € – 0,83 € netto (bez VAT)

Dla pliku: 2 fixations 35mm plinthe lave-vaisselle_0.4n_0.25mm_PLA_COREONE_35m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,76 € netto (środek widełek).

Masa podana przez autora
13 g
Czas druku podany przez autora
35,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Fixations de plinthe bois sur lave-vaisselle - analogue kit 00612653 Dishwasher wood plinth fixing -similar kit 00612653

Ocena
5 / 5
Polubienia
1
Pobrania
19
Wydruki
1
Wyświetlenia
146
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Français : Kit de fixation de plinthe pour Lave-vaisselle ; basé sur pièce 00612653 - compatible BOSCH, NEFF, GAGGENAU, BALAY, SIEMENS.

Version raccourcie et simplifiée : permet de fixer de manière réversible une plinthe découpée dans un panneau de façade de cuisine, par simple enfoncement.

Je viens de changer mon lave-vaisselle mais l'accessoire de montage de la plinthe n'était pas fourni ; j'ai fait une empreinte en pâte à modeler du réceptacle et j'ai dessiné une pièce compatible sous Fusion360.

Au départ j'avais réalisé une version de 60 mm mais ce n'est pas nécessaire (d'autant plus qu'elle nécessite d'être cintrée car le logement se réduit en allant dans la profondeur).

Imprimé en PLA, 30% remplissage. Utliser 2 petites vis à bois d=3mm.

 *********

English: Plinth mounting kit for dishwashers; based on part number 00612653 - compatible with BOSCH, NEFF, GAGGENAU, BALAY, and SIEMENS. 

Shortened and simplified version: allows for the reversible attachment of a plinth cut from a kitchen cabinet panel, simply by pushing it into place.

 I recently replaced my dishwasher, but the plinth mounting accessory wasn't included. 

I made a clay mold of the plinth's housing and designed a compatible part using Fusion 360. 

Initially, I created a 60mm version, but this isn't necessary (furthermore it needs to be curved because the housing narrows as it goes deeper). 

Printed in PLA, 30% infill. Use 2 small (d=3mm) screws for wood.

 

Tagi