Mitutoyo 300mm Magnetic Desk Stand for Secretlab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece system to which you can embed magnets to allow it to stick to the Secretlab Desk.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The magnets I used are located here: https://a.co/d/9AHg0B6
200mm Version Below:
Read below to know how to cut out the magnet holes, ( If Bambu Studio doesn't cut them out for you ):
In your slicer, ( I use Bambu Studio), to cut out the magnet holes, you will have to split the model into Parts, ("Split to Parts" button in the top right).
Then go to the “Objects” tab in your slicer, ( left side of the Bambu Studio Window), and select an object until you see the magnet hole being selected, I included a photo for reference.
Once you found which object is the magnet hole, right click on it, then “Change Type”, and then select “Negative Part” from the drop down list. Due this for all magnet holes.
Slice the model then use the slider in the Preview pane to determine where to pause the model to insert the magnets. You will want to pause the model on the layer before the top layer covers the magnet holes.
This is also the same area where you can find the object associated with the text, right click on them, and change the color for multicolor text, or AMS, etc.