1 / 2
Yet another Y-adapter for the PTFE tube. No friction losses!! — zdjęcie 1
1 / 2

Yet another Y-adapter for the PTFE tube. No friction losses!!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Noch ein Y-Adapter für das 4mm PTFE Rohr. Yet another Y-adapter for the PTFE tube.

Ocena
5 / 5
Polubienia
5
Pobrania
45
Wydruki
1
Wyświetlenia
184
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ein weiterer Y-Adapter für das 4mm PTFE Rohr, mit  Innengewinden. Einfach zu drucken. 0,2 mm Schichtdicke. Achte auf die richtige Ausrichtung und die erste Schicht im Kanal, sodas die erste Schicht im Kanal in Zugrichtung verläuft dann hast du so gut wie keine Reibungswiderstände.

Modell gedruckt mit PETG B-Ware von Grauts. 

Druckhilfe:

Für PC4-M10 PTFE Anschlüsse. Auf die Ausrichtung der innersten Schichten im Tunnel achten, dann flutscht es wie geschmiert. Kann liegend gedruckt werden. Überhänge sehr langsam Drucken (20mm/s). Keine Stützen nötig.  

Another Y-adapter for 4mm PTFE tubing, with internal threads. Easy to print. 0.2mm layer height. Model printed with Grauts B-grade PETG. 

Printing tips: 

For PC4-M10 PTFE fittings. Pay attention to the alignment of the innermost layers in the tunnel; then it will print smoothly. Can be printed horizontally. Print overhangs very slowly (20mm/s). No supports needed. Pay attention to the correct alignment and the first layer in the channel, so that the first layer in the channel runs in the direction of pull, then you will have virtually no frictional resistance.

Tagi