RYOBI/MILWAUKEE DIN Rail toolholder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket/toolholders to hang from DIN Rail.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pressed for space, I made this tool-holder to get these tools out of a closet. The tools shown all came in individual cardboard boxes, which took up valuable space. This works for lighter tools. I think circular saws, etc., will probably be too heavy.
I modeled the Ryobi holder brackets to slide into the tool battery slot. For most of these tools, the spring contacts in the tool hold it well on to the bracket. I also modeled with a 10° angle to add some gravity to help hold them and make it harder to accidentally bump them off. I made a similar bracket for my Milwaukee sander. I'm not sure how it would work for other Milwaukee tools.
The brackets are three pieces. The DIN clamp and locking clip, and the tool battery insert. They are held together with M3 screws and nuts. I'm uploading files for these and the DIN end caps. Due to the shape of individual tools, some needed to be held higher of the DIN, so I made one bracket with a higher rise. Also, some tools work better if the holder's battery shaft is reversed, so I've included those. This is a WIP for individual tools, verify it will work for yours.
The DIN I used is from Grainger, linked below. The endcap .STLs I found online did not fit this DIN, so I made the ones included in the files. I've uploaded .3mf, and .STP for easy remixing.
https://www.grainger.com/product/Mounting-Track-DIN-Rail-Mounting-18Z760