Vario/Forte X54 Burr Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Burr Spacer to use X54 burrs in a Baratza Vario or Forte without losing coffee grounds to the resulting void.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
When using the X54 burrs in a Baratza Vario or Forte (maybe others?) the shape of the X54 burrs causes there to be a void above/below each burr. This is because there's a lip on the underside outside rim of the burr that the Baratza burrs don't have.
This void causes coffee grounds to be “lost”, at least until the void becomes completely filled up with stale coffee, but we don't want that obviously.
This spacer simply fills that void. Print in TPU with 100% infill. Reduce flowrate if your printer has trouble with TPU and/or creates gouges on the top layer. It should compress enough to probably not matter, but still.
Note that this is not a structural part - I have a theory that using this set of burrs in the Vario/Forte can lead to extremely minor “tacoing” of the burrs. I can't say I ever noticed any issues, maybe the burrs are sturdy enough this is a non issue. Anyway, this part is not intended to fix that, simply fill the empty space to make the grinder zero-retention (or at least very close to zero-retention).