Stealthburner front mounted eddy probe (works with tap, SB2040)

A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. 

This model was designed around the mellow probe but given then the shape is similar may work with beacon as the beacon probe mount mostly works with the mellow one. ADDIT: works well with carto V4 BUT sticks out way too far to use the guard. The can wire obviously doesn't fit through the FFC slot but does fit between the fan shroud and the face plate.

Unfortunately the screws enter where the neopixels go so they no longer provide bed lighting although can be tucked into the nose and can be used as notification lights through the small slots.

Also includes a cover that protects the back of the FFC cable. I also recommend buying a 4pin 0.5mm pitch extension board that can be taped under the SB breakout board to make the face easily detachable.