Quarterinch nut UNC 1/4''-20
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard UNC 1/4''-20 nut for use on photo or video tripods or any other generic use. Feel free to remix.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 365
- Wydruki
- 2
- Wyświetlenia
- 1005
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
The thread of this nut is optimized for 3D printing. It was tested successfully when printed on a Prusa Mini with Prusament PETG and on Ender3Pro with PLA from DasFilament.de.
I recommend to print it in the uploaded orientation (lying flat) and with 100% infill.
It should fit to a metal quarter inch screw with a tiny bit of friction. I could have given it slightly more mechanical play, but that would have reduced the strength under high load. In my personal view this is the optimal dimension for a printed thread.
The outer dimensions of the nut are made to match a normal UNC (unified coarse thread) quarter inch nut.
If you should need a fitting screw, you can find one here:
https://www.prusaprinters.org/prints/149604
Happy printing!