Dock for Rabbit R1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Following the acquisition of the great Rabbit R1 (https://www.rabbit.tech/rabbit-r1) I've design a dock for it
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Following the acquisition of the great Rabbit R1 (https://www.rabbit.tech/rabbit-r1) I've design a dock for it to stand on a desk or any place you will see fit.
The dock is using Rabbit R1 design and colors inspired itself by the great team of Teenage Engineering.
The dock is made to allow a charging cable to go under and on the left side where the R1 usb-c connector is. The model on picture is printed with PLA/PETG, but any material would do. You also need 2 m3 12mm screws (used to fit the industrial design).
Here a link to a screw box containing the compatible ones:
https://s.click.aliexpress.com/e/_c4d3Pda7
Disclaimer:
The accessory link is an affiliate one. No impact on the cost for you but it can support me with my creations. Thank you for your understanding