Lanberg 10" rack leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leg for Lanberg racks.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
Leg for Lanberg racks. These racks are mostly put on walls, but many use it as a desktop 10" rack. These racks have one main issue. The screws for the bottom hinge are lower than the bottom of the rack, and they are scratching any surface. Because of this, I designed this simple leg. It was printed from TPU, so if the hole is a bit narrower, it can also fit, but these are 1 cm wide. The first images show the first version, which thread was 2.5 cm, but it was too tall, so the 1 cm tall thread is the perfect.
Size:
Material: TPU for flexibility
Width: 4cm
Height without the thread: 2 cm
Height with thread: 3 cm
Thread is M10 and 1 cm high