Stargate picture frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Somebody told me that my old stargate model would make for a nice picture frame
- Ocena
- 4,667 / 5
- Polubienia
- 249
- Pobrania
- 763
- Wydruki
- 3
- Wyświetlenia
- 3174
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang
stargate: print with supports at 0.12
base: no supports, i printed at 0.12 but 0.2 should be fine
base: no supports, i printed at 0.12 but 0.2 should be fine
The model has a picture window diameter of 90 mm, probably enlarging it won't create any issues but if you print it smaller the glyphs will likely disappear.
The back holds the picture in place, if you're feeling extra cheap it can be replaced with some little bits of tape