De-Sta-Co Clamp #424 Gridfinity Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity holder for 2ea Destaco #424 toggle clamps
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These toggle clamps are not aviation specific, but they are commonly used in aircraft sheet metal work. There are others that work the same way, but this style seems to be the most common. I currently only have one of them, which is over 20 years old, but I don't think they have changed much. Hopefully current manufacture of these clamps will also fit in the holder. There was barely space for them in 1x3 squares; due to the relatively thin walls at the ends of the recesses, it's probably a good idea to print it with no larger than a 0.4mm nozzle.
Like my other Gridfinity models, the base is altered to accept 6x3 magnets as a press fit, with the upper surface of the magnet holes modified to make the slicer bridge across correctly for a clean result. Due to the size of this model, I have included sacrificial “mouse ears” in the CAD to give the ends more surface area to help prevent them warping off the bed. These will need to be removed after printing.
The unit pictured was printed out of Overture PLA on my bear upgraded Mk3S+, using a 0.4mm nozzle, at 0.2mm layer height.
Edit, 14DEC25; the current production #424 clamp seems to also fit just fine.