1 / 1
Large build plate X-Y-Z dimension standard (300 x 300 x 300) — zdjęcie 1

Large build plate X-Y-Z dimension standard (300 x 300 x 300)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to verify the X-Y shrinkage and Z-shrinkage settings on a large bed

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Nothing fancy, just a set of printed axis that you can measure to verify your shrinkage rates are accurate. Little printed cubes are cute but are not adequate for large print distances. This will let you get 10ths of a mm reliably. 

To use, ensure the XY and Z shrinkage compensations are set to 100 in the Material Settings and Precise Z Height is selected in the Process Quality tab. 

Print this file, let it cool completely then measure as accurately as you can (I used 12"/300mm digital calipers). X and Y will probably be slightly different so you'll have to use the average there (eg: if X is 297.7mm and Y is 298.1mm, pick 297.9mm as the value). Divide by 3 (99.3 in the above example) and enter this number in the filament's Shrinkage(XY) value.  Similarly divide the Z measurement by 3 and enter the result in the filament's Shrinkage(Z) value. (all references are to Orca Slicer – may be slightly different in other slicers). 

The design was dead simple: I just scaled primitives right in Orca and centered each one. As the beams are long and skinny, I suggest using a brim or at least mouse ears near the ends to ensure bed adhesion. For a bed with less height one can easily create a variant with a lower Z dimension as shown in the photo – just adjust your divisor accordingly. EG: if Z is scaled to 200mm, divide the measurement by 2 instead of 3.