Subaru Forester Exhaust Hanger 107mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust hanger for a 2006 Subaru Forsester. Hanger holes are 107mm apart, and 15mm in diameter. I needed a longer one…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Exhaust hanger for a 2006 Subaru Forsester. Hanger holes are 107mm apart, and 15mm in diameter. I needed a longer one for an aftermarked muffler and tow bar, so I made this and printed in TPU, 10 months in and it's held up great. Photo above is after 10 months, forgot to take one at the beginning
Print Settings
Printer Brand:Creality
Printer: Ender 3
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: .16
Infill: 50
Filament: Sain Smart TPU Blue
Notes: 50% infill is very rigid, even in TPU, you could probably get away with 25 or 30% just fine.