Laser Door Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
photo on printbed shows previous version without reinforcementWhile waiting for the delivery guy with our Makerspace's…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
photo on printbed shows previous version without reinforcement
While waiting for the delivery guy with our Makerspace's laser cutter, I made this fancy two color knob for the door leading to the machine. Although initially designed on a whim, it ended up being very sturdy after some slight alterations and I thought I'd share this model with you!
No dual extrusion required, but two M5 nuts and bolts - enjoy :-)
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
40 %
Notes:
I switched the color from yellow to black mid-print to recreate the look of a laser warning sign. With a machine and filament you are comfortable with, this is pretty easy! X3D file with color information is also included in case someone has dual extrusion.
Post-Printing
Nuts & Bolts
Two M5 nuts that will just fit into the recesses in the base (heat them with a soldering iron if it is a little tight) and two M5 bolts going through the door from the inside are required in addition to the printed part. Make sure the bolts are long enough, I ended up sinking mine quite a bit into the door...
How I Designed This
Designed with Tinkercad based on approx. measurements of a salt shaker that felt right and an imported SVG sketch of the laser warning symbol. The lack of a chamfer around the base is a little annoying, if the knob ever breaks or someone asks nicely I'll get back to working on this ;-)
Category: Household