4" Right-Angle Ducting Adapter — Mounts Directly Into a 2×4 (Designed in Fusion 360, Printed in PETG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy right-angle pipe/ducting adapter designed specifically to mount directly into a standard 2×4 stud.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
is is a sturdy right-angle pipe/ducting adapter designed specifically to mount directly into a standard 2×4 stud. Perfect for shop ventilation, fume extraction, or routing 4" dust-collection hose in tight spaces where a clean 90° turn is needed.
I designed this in Fusion 360 and printed the final part in PETG for durability and heat resistance. The fit is tight, strong, and ready for real workshop use.
🛠 Features
✔ 4-inch ducting compatible (outer diameter sized for standard dust-collection fittings)
✔ 90° right-angle bend for compact routing
✔ Integrated mounting plate sized to sit flush on a 2×4
✔ Pilot holes for screws to secure directly into studs
✔ Thick walls & reinforced geometry for strong airflow paths
✔ Modeled in Fusion 360 for accuracy
✔ Made for PETG—heat and impact resistant
🖨 Recommended Print Settings (PETG)
Material: PETG
Nozzle Size: 0.4 mm (0.6 mm recommended for stronger walls)
Layer Height: 0.20–0.28 mm
Wall Count: 4–5 walls (for rigidity + airtightness)
Infill: 20–35% (Gyroid or Cubic)
Top/Bottom Layers: 4–5
Temperature:
Nozzle: 240–250°C
Bed: 80–90°C
Cooling: 20–40%
Print Orientation: Base plate down
Supports: Required — “Support on build plate only” recommended
📏 Dimensions
Ducting Diameter: Fits standard 4" dust hose / duct
Overall Length/Width: Sized for tight workshop spaces (varies slightly by slicer)
Mounting Plate: Fits a standard 2×4 (actual width 3.5")
Screw Holes: Pre-modeled pilot holes for wood screws
💡 Intended Uses
Dust collection systems
Fume extraction (soldering, 3D printing, etc.)
Airflow redirection inside shop walls or enclosures
Venting to/from a grow tent, paint booth, enclosure, or CNC cabinet
Any setup where you need a durable 4" 90° bend mounted to a stud
🔧 Notes
Printed in PETG for strength and temperature resistance.
Designed to screw directly into a 2×4 stud for a solid mount.
You can add a bead of silicone for a fully airtight seal if needed.