1 / 1
4" T-Pipe Ducting Adapter — Mounts Directly to a 2×4 (Designed in Fusion 360, Printed in PETG) — zdjęcie 1

4" T-Pipe Ducting Adapter — Mounts Directly to a 2×4 (Designed in Fusion 360, Printed in PETG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a heavy-duty 4-inch T-style ducting connector designed to be mounted directly into a 2×4 stud.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a heavy-duty 4-inch T-style ducting connector designed to be mounted directly into a 2×4 stud. Perfect for dust collection, shop ventilation, fume extraction, or splitting airflow between two routes while securing the assembly firmly to a wall or frame.

I modeled this in Fusion 360 for accuracy and printed the final version in PETG for strength, durability, and heat resistance in a workshop environment.

🛠 Features

✔ 4-inch ducting compatible with standard dust-collection hoses

✔ T-junction design for splitting or combining airflow

✔ Integrated 2×4 mounting plate with pre-drilled screw holes

✔ Reinforced wall thickness for pressure and impact resistance

✔ Smooth internal airflow path designed to reduce turbulence

✔ Printed in PETG for workshop use (heat, impact, and chemical resistance)

✔ CAD-modeled in Fusion 360 for precise fitment

🖨 Recommended Print Settings (PETG)

Material: PETG

Nozzle: 0.4 mm (0.6 mm recommended for stronger walls)

Layer Height: 0.20–0.28 mm

Walls/Perimeters: 4–5

Infill: 20–35% (Gyroid or Cubic preferred)

Top/Bottom Layers: 4–5

Temperature:

Nozzle: 240–250°C

Bed: 80–90°C

Cooling: 20–40%

Orientation: Base plate down

Supports: Required — “Supports touching build plate only” works best

📏 Dimensions

Duct Diameter: Fits standard 4" hose/ducting

T-Branch: Same 4" inner diameter for consistent airflow

Mounting Plate: Sized for a standard 2×4 stud (3.5" actual width)

Mounting Holes: Pre-built pilot holes sized for wood screws

💡 Intended Uses

Dust collection splitters

Ventilation and fume extraction

CNC, woodworking, or 3D-printer enclosures

Grow tent/manifold style airflow control

General shop air routing

Splitting suction between two machines or intakes

🔧 Notes

Printed in PETG for rigidity, temperature resistance, and long-term durability.

Designed specifically to screw into a 2×4 stud for a rock-solid mount even under hose tension.

A thin bead of silicone can be added inside or along the mounting plate for an airtight seal if required.