Anker A8352 Steam Deck Dock Enclosure (Updated v2 Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts the Anker A8352 USB-C Hub into a Steam Deck Dock. Tolerances were made for printing at 0.3mm layer height.
- Ocena
- 4,833 / 5
- Polubienia
- 43
- Pobrania
- 370
- Wydruki
- 6
- Wyświetlenia
- 3790
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
DESIGN DOES NOT SUPPORT CASES
Converts the Anker A8352 USB-C Hub into a fully enclosed Steam Deck Dock. V2 Design means new snap design and no more screws needed.
Tolerances were made for printing at 0.3mm layer height.
IMPORTANT! Print the top piece as mesh, if the hubs are fully enclosed they will 100% overheat! (top layers: 0, bottom layers: 0, wall line count: 8, infill pattern: lines, infill density: 20% or less)
Bottom Piece can be printed similarly, your choice. (my bottom is mesh)
Optional Parts
USB-C 3.1 Right Angle Adapter/Extender https://www.amazon.com/dp/B08CDGHQWF
CAT6 Right Angle Ethernet Cable https://www.amazon.com/dp/B01FHC0H7G
Total Part Cost ~$16