Carf Rebel Classic Forward Wheel Well
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wheel well cover for the forward gear to fit the Carf Rebel Classic.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
For those seeking a wheel well cover for the Carf Rebel Classic. It is tested with the JP gear but I am pretty sure it will fit the Electron gear as well.
This is particularly useful if you fly off grass or wet runways.
Print out of any material/infill you see fit. There will be a small gap where the rear part of the wheel well meets the bottom skin of the fuselage. You can either choose to 1) Fill it in with filler or epoxy, 2) glue a scrap piece in, or 3) leave the gap (what I did).
I hope you find some use for this item and please check out my other Carf Rebel Classic parts which may be of use as well.
A.