Frient Air Quality Sensor, Skådis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for attaching the Frient Air Quality Sensor to the IKEA Skådis system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A mount for attaching the Frient Air Quality Sensor to the IKEA Skådis system.
I decided to use the same attachment like Gamma Blockers deburring tool holder.
You will need to download the “Twist Clip” from his model to use with my mount.
Hardware needed:
2x Button head M3x10mm bolts to attach the air quality sensor to the mount.
Printed parts:
1x frient_air_quality_sensor_skadis_mount
1x Twist Clip
Installation:
1 - Insert the Twist Clip into the mount so that the smallest part is sticking out the back (push the large part flush with the surface).
2 - Attach the air quality sensor backplate with the 2x button head m3x10mm bolts (make them centered in the curved slots).
3 - Insert the mount with the twist clip into a Skådis slot and twist it 90 degrees clockwise.
4 - Snap on the cover of the air quality sensor.