FI Mini Pet GPS Case and Collar Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heres a case/cover/mount for the new FI Dogs Mini GPS, meant to use with 3mm wide zip ties to attach to any collar.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
The FI Dogs Mini GPS tracker is great, but it comes with these rubber sleeves to mount to collars that are not sturdy or trustworthy in any way. After months of using a series of zip ties at all times to keep from losing the tracker, decided to just make this mount. It just pops right in the back, fitment is perfect. has slots to run through x2 3mm zip ties, so you can attach to whatever. I printed in PETG CF, but regular PETG, PLA, and even TPU would work great as well.
Tried a few different ways to print, you can print it facing down, but the face and the logo dont look quite as good as facing up. Facing up, just use supports and it prints very clean and looks good. You can add fuzzy skin with 0.2mm thickness and 0.2mm point distance and give it a slight textured surface. Regular 0.2mm layers is fine, I did 15% infill with PETG CF, would probably do 25-35% for regular PETG or PLA.
Update Feb 8, '26
I have uploaded a 3 zip tie version at request from a user. So that is now an option as well. The 2 zip tie version is great for my 40 pound pit puppy who's extremely energetic, even on the outside of her harness, where it gets bumped and scraped constantly. I only have to replace the zip ties when i take it off to charge it. So the 2 zip tie version is probably fine for most scenarios. But for pets with much smaller collars, the three zip tie version might just make it a bit more secure.