1 / 2
Busy Board Drive Gear with Rotating Handle (print in place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the drive gear with a rotating handle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
An updated drive wheel for the Busy Board Gear Train. Instead of the original fixed handle, this one adds a freely rotating (but non-removable) sleeve around the handle.
Designed to be printed in place, tested with PLA, 0.2mm layer height. No supports required. The handle (or the entire gear) should be printed with 3 perimeters for better strength.