1 / 4
Vase Mode Traffic Cone
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A useful, quick to print, and stackable traffic cone that is designed to be printed in vase mode.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
What is it?
This is a traffic cone that can be printed in vase mode to make it print significantly faster. It's always nice to have a few of these around. Whether you're playing sports in the backyard or broken down on the side of the road having a few of these can come in very handy.
How it works
The cones are completely stackable, and they have holes in the base for when you need to tie them down.
Print instructions
- Designed to be printed in vase mode but can be printed regularly as well.
- If printed in vase mode needs 9 solid bottom layers.
| Material | PETG is best. But PLA works too |
| Parameters | 1 (Vase mode) |
| Infill | 0% (Vase mode) |
| Nozzle | .4mm |
| Layer height | .2mm |
| Supports | No |
| Brim | No |
| Bottom solid layers | 9 |
- I have some pre-sliced Gcodes available as well.
- Be careful scaling the model because it's only one layer thick so vase mode might not work in another size.
- Let me know if you want me to add other sizes.