9/10mm Funssor Stainless steel Trident Gantry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of spacers for the Funssor stainless steel gantry
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
These are spacers for a 9mm (10mm works too, don't be me, buy 9mm belts) for the very cheap (about ⅓ of the others I could find when the bearings are included) laser cut stainless set by Funssor (https://www.aliexpress.com/item/1005007038349339.html). TheAB mounts seem loosely based of AluminiumG's laser cut versions but the XY joints and ilders are all new or taken from someone else I can't find to credit accordingly.
These were used on my BLV conversion so the x gantry may not perfectly fit the standard voron one but hopefully will still work (the BLV gantry may be 3mm either end (BLV gantry is 460 for a 496mm span vs a 430 for a 470mm span). It should still bolt in and be stable but might have a small gap visible that shouldnt affect rigidity. Let me know if it doesn't and I can make a new version. Edit: had a brain fart its probably 2mm too short so I've added a 2mm deeper version that should work.
I've made all new spacers to suite. All use 5mm shafts (https://www.aliexpress.com/item/1005006848211309.html) held in by m3x8mm bolts. 30mm for the AB and idlers, 35mm for the XY joints. You also need 10 695 bearings (10-14 depending on the number of idlers you use)
You can use the CNC 3DPrintingMods/AluminiumG parts for the AB mounts or my/smokescreens modified M5 parts (https://www.printables.com/model/1492759-ab-tensioner-for-funssor-stainless-trident-ab-moun)
After a bit more googling it appears the kit is based off this SO3 mod (https://www.printables.com/model/817060-trident-so3) although I haven't used the files to create these ones.