Kobalt Mini Toolbox Lid Support, Glue In Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of your Mini-Toolbox lid falling all the way back? Try this slim solution that doesn't clutter things up!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a sleek, slim and permanent solution to the lid falling back on my Mini-Toolbox. I designed this specifically for the Kobalt brand mini-toolbox, but it may fit others. This is a great solution to keep the toolbox looking like there is no additions or extra pieces that hold the lid temporarily.
Printed in PLA+ with 10% infill gyroid, 5 wall cnt.
Make sure to mark the area that you will attach the support to on your toolbox. Sand the area on the toolbox were the support will be super-glued. I also recommend sanding the print where the glue will attach also. I did clamp the support to the toolbox for 15 min to ensure good adhesion.