1 / 1
Banner of Rao
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A banner from our current Greyhawk based campaign. Built in Tinkercad.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
The fronds in the pic are just some random twine I had. The split file is the better for FDM. I used a .25 nozzle on a MK4s.
What is it?
A banner held by a D&D character to add buffs to party.
- Must be held with two hands by a follower of Rao.
- Character cannot cast or perform any action
- If wielder takes damage, player must roll a 10+ on a d20 or value to half the potential dmg if that is over 20. Failure = banner dips and needs to be re-raised as an action.
- lvl 1: Allies within 10 ft gain adv vs fear + +1 atk +1d4 dmg
- lvl 4: Allies within 30 ft gain adv vs fear + +2 atk +1d8 dmg
- lvl 9: Allies within 60 ft gain adv vs fear + adv on atk +2d6 dmg
When another Banner of Rao is weilded by a Rao faithful within 30 ft, all effects are doubled.