1 / 3
Internal Resistance Meter use Ts457 module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The product exploits a low cost module that is efficient and has very high precision.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
About
A personalized remix for easy component searching, extra ports for oversized batteries, and easier assembly.
Components
All the components I use for the products are purchased from the links below (or can be replaced with similar components):
- Internal resistance tester contact:
- Battery charging and protection TP4056 module:
- A pair of 18650 batteries:
(Make sure the two batteries have the same capacity, it is better to use two identical ones)
- Switch (8.5*13.5mm):
- XH2.54 4P male connector:
M2 screw:
- Screw: x6
- Super glue (cyanoacrylate) is also used:
Wiring diagram
Print setting
- Nozzle: 0.4mm
- Layer height: 0.2mm
- Wall: 3 layer (4 layer for the Bolt part)
- Top: 4 layer
- Bottom: 3 layer
- Infill: Gyroid 20% (30% for the Bolt part)
- Support: Tree
- Brim: Mouse ear (if need)