Marvelous Feline
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #9c0087 PLA+ Sunlu Fuschia Transmission Distance: 5 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ff8000 PLA+ Sunlu Orange Transmission Distance: 5 #ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5 #ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Fuschia At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #13 (1.12mm) swap to Skin At layer #19 (1.6mm) swap to White for the rest.