1 / 2
Saturn 4 ultra 16k vent adapter - 100mm / 45 degrees
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45 degree 100mm vent adapter for Elegoo Saturn 4 Ultra 16k exhaust venting.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
A follow on of the 75mm vent adapter.
I needed a 45 degree vent adapter to vent out of the back of the printer but not get in the way of the lid when opened as it takes quite a bit of space behind the printer to do so. I designed this to have a good insert fit into the printer's 75mm vent port and accommodate 3mm hardware nut/bolt - the vent sweeps up to a 100mm outer diameter to work with 100mm ducting.
