1 / 8
GTR Specialties MGNZ Annealer Project Tslot Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build your own inductive annealer using the MGNZ project. This is a 2020 t-slot enclosure surrounded by 5mm thick panels
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (21)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (5)Powiązane

2x M4x8 Set screws
2x 4010 fans, 12vdc
4x M3x16 BHS
Big thanks to Wombat Ordinance for the drop tray and casefeeder and to Johny69 for his additional parts.
The build should be pretty straight forward. Build the entire drop tray out of ABS for heat. Everything is is PLA+ using a .6 nozzle, 4 walls, 15% cubic infill and 4 top and bottom layers.
More pics of how it's built coming.
Big Edit!!!! The side 2020 are 170mm in length, not 210!!!