Ring Light Mount for AOC 24G2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Ring light mount for the AOC 24G2 using the stand that comes in the box as a base
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ring Light Mount for AOC 24G2
Hey, this was my first project that i measured and modeled a thing in Fusion 360 to solve a problem for me. It was really fun to make and could probably use some optimizations to use a bit less material and to have a tighter fitment of the two pieces.
It mounts on the height adjustment of the AOC Hero 24G2 monitor, so the light, camera or anything that you mount in it, will follow the height of the screen, making a very nice adapter to use.
I was inspired by two projects:
But they either would not fit properly on the AOC Hero because of it's curved back, or needed double sided tape, which in my experience, is bound to fail sometime.
It is made to use a screw to secure the light to the shaft.
The shaft can be extended to fit the 27 inch version of the AOC Hero 27G2.
It will fit any monitors that use a similar height adjustment mechanism.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:
Doesn't Matter
- Supports:
Yes
- Resolution:
Standard 0.2
- Infill:
15%
- Notes:
Maybe it can be printed without any supports since the shaft has a small overhang, but it is not too large.
Post-Printing
Add a screw through the shaft
You can use the screw that comes with a ring light, it is made for a 0.3mm wide screw, or modify the shaft to use other types of screws, just remember to use a long screwdriver!